Welcome to OnlineConversion.com Forums 

Convert and Calculate Post any conversion related questions and discussions here. If you're having trouble converting something, this is where you should post. * Guest Posting is allowed. 

Thread Tools  Display Modes 
#11




Re: Converting RPM to m/s
pls give me suggession about my rpm meter

#12




Re: Converting M/S^2 TO RPM
acceleration = (velocity/ time)
velocity = meters/sec velocity = (circumference * rpm)/ seconds velocity = (2*pie*radius*rpm)metres/ 60seconds HerrWarum m/ sec^2 = (3.14*2*radius* rpm)/(60*60) then, rpm = (0.914*60*60) /(3.14*2* radius) just put the value of radius and get the answer, i think this is your answer BY: RAM KUMAR 
#13




Re: Converting RPM to m/s
what is 1meter per second convert to rpm

#14




Re: Converting RPM to m/s
It depends on the radius of what is rotating. If you read post #2 or #9, you can probably figure it out.

#15




Re: Converting RPM to m/s
I'm agitating a solution in a Parallel rectangles tank by means of electrical stirrer, the stirrng rod is placed in the centre point of the solution. Knowing that the the dimensions of the tank (solution) are 0.6 m * 0.4 m base and 0.1 m height.
How can convert RPM of the solution stirring to linear velocity????? any help plz 
#16




Re: Converting RPM to m/s
Quote:
Either way, i think there is no way you can calculate this without measuring the shear rate (for example with a Brookfield viscometer). I've stood there looking at stirrers that are obviously going around faster than the solution they are in.  Also, any solution has a bit of a lag, and your rpm at the edge won't be the same as the rpm at the centre. 
#17




Re: Converting RPM to m/s
thank's sir..
very useful to me 
#18




Re: Converting RPM to m/s
pls how do i convert 2400 rpm to meter per second?

#19




Re: Converting RPM to m/s
Quote:
1. find out the length of the circumference in meters, either by measuring it, or by working it out from the diameter. 2. multiply this length by 2400 to get distance travelled in one minute. 3. divide the 1 minute travel distance by 60 to get meters per second. 
#20




Re: Converting RPM to m/s
Thank you from Chile

Thread Tools  
Display Modes  

