Tons to Cubic Metre

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

[Robert Fogt]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.

[Winnie]

The substance I'm looking at is MTBE. It has a specific gravity of .74 g/cm3. And I need to convert 1 ton to 1 m3.

[Robert Fogt]

It just so happens that gram/cubic centimeter is the same as tonne/cubic meter.

So something with a density of 0.74 gram/cubic centimeter you would:

tonne / 0.74 = cubic meters
cubic meters * 0.74 = tonnes

[Unregistered]

what is the value of cubic metre to tons?
or how many cubic metre in 1 ton?
or how many tons in 1 cubic metre?

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.



crusher dust / Lillydale / crushed rock

top soil

[Unregistered]

1 ton of gravel = what in qubic metres

[Robert Fogt]

loose dry gravel has a density of about 95 pounds/cubic foot, wet is about 125 pounds/cubic foot.

1 ton = 2000 pounds
2000 pounds / 95 pounds/cubic foot = 21 cubic foot
21 cubic foot = 0.6 cubic meter

[Unregistered]

what is the value of cubic metre to tons?
or how many cubic metre in 1 ton?
or how many tons in 1 cubic metre?
or how many cubic meters of sand is in 1 tonne

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?
all i need is a convertion of 1 cubic meter of type 1 crush into tonnes loose and the same in a bulk bag

[Robert Fogt]

What type of substance is type 1 crush?

[Unregistered]

What type of substance is type 1 crush?
it is crushed concrete used for bases under drive ways

[Unregistered]

i need to convert 15 cubic meters of crused concrete or mot type 1 in to tonnes

[Robert Fogt]

The closest thing I could find was concrete gravel, it has a density of 2.4 tonne/cubic meter.

cubic meter * 2.4 = tonne
tonne / 2.4 = cubic meter

15 cubic meter * 2.4 tonne/cubic meter = 36 tonne

[Unregistered]

what is the value of cubic metre to tons?
or how many cubic metre in 1 ton?
or how many tons in 1 cubic metre?
how much is 3.5 cubic meters of sharp sand in tonnes

[Robert Fogt]

What is sharp sand? Quartz sand? Dry sand? Wet sand? I found several sands on the list but none specifically stating sharp sand.

[Unregistered]

What is sharp sand? Quartz sand? Dry sand? Wet sand? I found several sands on the list but none specifically stating sharp sand.
just convert sand then from 1 cubic meter to 1 tonne wet and dry thank you

[Robert Fogt]

Here is the data.

Sand, wet - 1.92 tonne/cubic meter
Sand, wet, packed - 2.08 tonne/cubic meter
Sand, dry - 1.60 tonne/cubic meter
Sand, loose - 1.44 tonne/cubic meter
Sand, rammed - 1.68 tonne/cubic meter
Quartz sand - 1.2 tonne/cubic meter

cubic meters * x = tonne
tonne / x = cubic meters

Where x is one of the values from above.

[Unregistered]

how do i convert Granular Fill OPSS Form 1010, Granular B, Type I or II from tons to cubic metres? This is compacted fill for backfilling a building foundation.

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

1 MT = cubic meter

[Unregistered]

1 metric tonne how many cubic meters

[Unregistered]

in rock area 1 metric tonne how many cubic meters

[Robert Fogt]

That will depend on the density of the rock. Do you know that type of rock it is?

[Unregistered]

what is the value of cubic metre to tons?
or how many cubic metre in 1 ton?
or how many tons in 1 cubic metre?
7mx6mx1.5m reduce dig in soil converts to how many tonnes?

[Unregistered]

i need to know how much cubic metres per ton of building stone 19mm and 13mm , can anybody help.email gary@roofingandsteel.co.za

[Unregistered]

all i need is a convertion of 1 cubic meter of type 1 crush into tonnes loose and the same in a bulk bag

Just in case when i need to covert m3 of screed into sand cement (tonne) i multiply the m3 by 2.14 to get the weight
ie 3 m3 of wet screed is 2.14 tonne of sand cement

[Unregistered]

hey i got 20 how many cubic yrd is 20 tons

[Unregistered]

I need to convert 128 tonnes of loose, wet sand into cubic meters?

[Robert Fogt]

128 metric tonne of wet sand = 66.67 cubic meters

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.



waste engine oil
waste engine oil contaminated with water

[pang set ling]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

I would like to know the conversion from litre to cubic metres as well, meaning 1 litre of water = ? cubic

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

The substance is fuel oil and I need to convert cubic meters to tons.

[Unregistered]

loose dry gravel has a density of about 95 pounds/cubic foot, wet is about 125 pounds/cubic foot.

1 ton = 2000 pounds
2000 pounds / 95 pounds/cubic foot = 21 cubic foot
21 cubic foot = 0.6 cubic meter

convert 1ton of fuel oil to cubic meter

[Unregistered]

How to convert Cubic Meter to Metric Ton???

[roger]

I need to convert tons into cubed meters

1050 tons = cubed meters

[Mrs X]

Everyone, You need to say what you are trying to convert. Everything has a different density, and is compared to water. One cubic meter of water weighs 1000kg or 1 ton, but other materials will weigh different amounts.

[Unregistered]

I am trying to figure out how many cubic meters are in one ton of hardwood logs? Please help

[Trooper_One]

Hi All,

How much can 1 metric ton of 25mm road mulch (crushed aggregate for normal roads) fit in one cubic meter? (or whatever the conversion is for this)

Thanks.

Is the density/multiplier for 25mm road mulch 1.65?

- Trooper

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.
substance is O2

[Unregistered]

Does anyone know the density equivalents of
1. Asbestos cement
2. Asbestos fibrous board (AIB)
3. Asbestos composite vinly tiles

[Unregistered]

what is the value of cubic metre to tons?
or how many cubic metre in 1 ton?
or how many tons in 1 cubic metre?
300 000 tonnes how many in cubic meter? item hydrolica.

[Mrs X]

300 000 tonnes how many in cubic meter? item hydrolica.

do you have a density or specific gravity? - Didn't manage to google it. Is it Hydraulic oil? (If the material is a fluid, it will be in the region of 250,000 to 350,000 m³) - That's an enormous amount, what is it used for?

[Unregistered]

Hi all, i would like to know how much of cement (portland) is in 1 cubic metre!
Thanks

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. e.g. convert 310 tons of water to cubic meter. Can anyone help?

[Mrs X]

I need to convert tons to cubic metres and I can't find that conversion anywhere. e.g. convert 310 tons of water to cubic meter. Can anyone help?

Different substances have different conversions, but they are all based on the conversion (density or specific gravity) of water. It varies a bit with temperature, but you can assume that at room temperature, 1 ton of water occupies one cubic meter.

310 tons water = 310m³

[Robert Fogt]

Metric tons.

I assume thats what he was using, just didn't want to confuse the US and UK visitors.

[Unregistered]

crusher dust / Lillydale / crushed rock

top soil

Where is the answer to this question?

[Robert Fogt]

Where is the answer to this question?

Please be more specific, and start your question in a new thread so it is easier and less confusing.

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?
tHE DENSITY OF ANY MATERIAL DIFFERS FROM TH EOTHER. HENCE YOU HAVE TO FIND OUT THE DENSITY BY ANALYSIS.

[Unregistered]

convert one ton of sand into cubic feet

[kanika]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

[Unregistered]

Does anyone know how heavy (in tonnes) 1m cubed of top soil is?

[fiaz]

loose dry gravel has a density of about 95 pounds/cubic foot, wet is about 125 pounds/cubic foot.

1 ton = 2000 pounds
2000 pounds / 95 pounds/cubic foot = 21 cubic foot
21 cubic foot = 0.6 cubic meter
is this convertion for all kind and sizes of gravel

[Robert Fogt]

is this convertion for all kind and sizes of gravel

No. I do not know what type of gravel. It was simply the only density measurement I found for it.

[Unregistered]

I am an Engineering Student looking for some help. I'm required to work out the number of tonnes of fuel oil a vessel would require in a 20-day voyage. I've been given the necessary datum and have thus determined how many tonnes I require. However, I am also required to determine the volume.

I have just been given a value and I am not sure whether it means tonnes per cubic metre, or kilograms per cubic metre. It just says that the relative density of the fuel is such and such.

[Robert Fogt]

I am an Engineering Student looking for some help. I'm required to work out the number of tonnes of fuel oil a vessel would require in a 20-day voyage. I've been given the necessary datum and have thus determined how many tonnes I require. However, I am also required to determine the volume.

I have just been given a value and I am not sure whether it means tonnes per cubic metre, or kilograms per cubic metre. It just says that the relative density of the fuel is such and such.

What is the density value you have? We should be able to determine what the units are based simply on the size of the number.

Often density is listed in tonnes/cubic meter or kilograms/liter. Both are equivalent.

[Unregistered]

convert one ton of sand into cubic feet
convert sixsteen cubic meter to tons

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.

SUBSTANCE IS GRANITE AND SAND.


THANKS,

[Unregistered]

i would like to convert volume to tons of tarmac

[Mahesh Khande]

I need to convert Metres to KG, for eg Ms sheet of 5mm thick, 5ft lenth,10ft height, Can you suggest me.

I hope some will do the needfull

[cannia25]

I need to convert CO2 tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

[Unregistered]

hi i need help please.

i need to convert 290m3 of top soil in to tonnes. thanks

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.

the substance is dirt ..landfill

[Unregistered]

I have had 2 tons of hard wood logs delivered...can anyone tell me how many cubic meters this would be?

[Unregistered]

I need 14 cubic feet of sand. How many pounds is that?

[Unregistered]

I have 1,680 cubic metres of soil (70% clay and 30% river sand), it is moist and stored in a compact pile. I need to know how many tonnes this may represent.

[Chris]

I don't think anyone mentioned the difference between a metric ton and an english ton.
1 english ton = 2000 lbs
1 metric ton = 1000 kg = 1 m^3 water

1 metric ton ~= 1.102 english tons

[Unregistered]

hello! gud pm! may i know how to convert Ton to cubic meter... substance is pyrites... hope ul reply to [.. guest link removed ..]... thank you so much!

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?
I need to convert 71.25 cubic metres to tons

[Unregistered]

How can I convert 6,686 tonnes to a value @ 143/m3 (bulking factor 1.5??

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.

This is related to Scsffolding. The price to be pay is 803 tenges per Tons. I need to know if there is a conversion or factor that I need to use to convert this Area in Cubic Meter to Tons...Please correct me if I'm wrong....

Length=170 Mtr
Height+12 Mtr
Width+1.5 Mtr

[Unregistered]

I own an aggregates company. 1 ton of type 1 MOT is 1.98m3.

[Zaher M]

I need to convert 1 cubic meter of rocks to Kg


Thanks

[JohnS]

I need to convert 1 cubic meter of rocks to Kg


Thanks

It will depend on the type and size of rocks, but 1500 - 1800 kg/m³ is a reasonable range covering many types.

[Unregistered]

How many cubic metre converted from 20 tons of saturated steam?

Thanks!

[jonalyn]

hi how are you i just want to know the answer to my question how many tons of armor rock in every 1 cubic meter?

[Dirtman]

hi how are you i just want to know the answer to my question how many tons of armor rock in every 1 cubic meter?

It depends on the size and type of rock, gradation, etc. You'll need to call a supplier with your specs for their weight/m3.

Average on weights of materials charts is around 1.6 t/m3 but large armor stone for breakwaters can reach 2.6 t/m3, as 1 rock can be over a m3.

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?


109 CUBIC METER TO TON

[Unregistered]

there are 1.92 tonnes of type 1 mot or scalpings to 1 cubic metre

[Demolition Lady]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?
Hi Im new to this site, I need to convert 20 tonnes of crushed brick rubble to cubic metres?

[Unregistered]

how many cubic meter is in 1 ton?

[Unregistered]

[QUOTE= how many tons of dry sand can i get in a cubic meter

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.

Hi i want to convert 1 cubic meter of firewood into 1 ton (1 ton of fire wood equals to how many cubic meter of firewood) can any one help

[JohnS]

Hi i want to convert 1 cubic meter of firewood into 1 ton (1 ton of fire wood equals to how many cubic meter of firewood) can any one help

Is this a stack of logs? You face two issues.
*Different woods have different density, as the density changes from fresh cut to dried, ready to burn. As a minimum, what wood species? Is it green or dried?
*Round logs don't stack perfectly into a cube; there is airspace. I've seen general guidance that a cord (128 ft³) contains about 80 ft³ of wood, the rest being airspace. Using this ratio, your stack of logs, for each cubic meter, would be about 0.625 m³ of wood, 0.375 m³ of air between the logs.

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

40 tons how many cubic meter

[sapnasidharth]

[QUOTE=Demolition Lady;63130]Hi Im new to this site, I need to convert 1 cum rubble to ton

[JohnS]

[QUOTE=Demolition Lady;63130]Hi Im new to this site, I need to convert 1 cum rubble to ton

It will be very dependent on what is in the rubble. If it is mostly broken concrete, stone, brick, try 1.6 t/m³

If there is much wooden construction material. it will be lighter. If there is much steel (beams, rebar, etc) it will be heavier.

[Unregistered]

HI,
I need to convert fuelwood from cubic metre to grams/m^3. Can you help?
THanks,

[Unregistered]

how can I convert Cubic Metre to metric tone of crude oil and refined petroleum (PMS, ETC)

[JohnS]

how can I convert Cubic Metre to metric tone of crude oil and refined petroleum (PMS, ETC)

You need to know the density which can vary over a considerable range for both crude oils and refined products. Crude oil can vary from around 0.6 to 1.2 t/m³, and, in total, the refined products can too, although individual refined products have narrower ranges.

If the density hasn't been measured, no meaningful conversion is possible.

[Unregistered]

what is the density for sharp sand

[Unregistered]

30 tons of sharp sand to cubic meter

[JohnS]

30 tons of sharp sand to cubic meter

I'm not sure how sharp sand differs from ordinary sand (packing density may be somewhat lower). Ordinary dry sand is about 1425 kg (1.425 metric tons) per cubic meter. Dividing by 1.425 t/m³, about 21 m³.

[Unregistered]

Everyone, You need to say what you are trying to convert. Everything has a different density, and is compared to water. One cubic meter of water weighs 1000kg or 1 ton, but other materials will weigh different amounts.

Hi, i need to know conversion factor of tonne of cement(Portland) to cubic meter ?

[JohnS]

Hi, i need to know conversion factor of tonne of cement(Portland) to cubic meter ?

1 m³ of Portland cement is about 1.5 t.

[Unregistered]

i need to convert tons to cubic metres and i can't find that conversion anywhere. Can anyone help?

good topsoil

[Unregistered]

Hi I have a math problem for calculus and I need some help. The density of crude oil is 850kg per cubic meter. I need to convert 125 tons into cubic meters. Here is all the information.
77000 tons of crude oil spilled into the ocean it is estimated that a total of 20 million gallons of oil were leaked into the sea at a rate of 125 tons per day.

[JohnS]

Hi I have a math problem for calculus and I need some help. The density of crude oil is 850kg per cubic meter. I need to convert 125 tons into cubic meters. Here is all the information.
77000 tons of crude oil spilled into the ocean it is estimated that a total of 20 million gallons of oil were leaked into the sea at a rate of 125 tons per day.

What kind of tons, short (2000 lb), long (2240 lb) or metric (1000 kg)? What kind of gallons, Customary (3.7854 L) or Imperial, 4.546 L)? Since these terms have multiple meanings, they have NO meaning.

125 metric tons at density 0.85 t/m³ is 147 m³ per day, or 147 000 L day (thats 39900 US gallons or 32300 Imperial gallons) unless the teacher means some other kind of ton.

If they mean some other kind of ton, convert to metric tons (tonne) first.
1 short ton = 0.907 184 74 t
1 long ton = 1.016 0469 t

[fk.]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?
crusher run 1m3 to 1ton

[Unregistered]

1 metric tonne how many cubic meters

37 tons to Cubic metres

[Unregistered]

sand 1 ton=m3

[Unregistered]

it depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance i may be able to look up the data.

the substance is bulk mielies

[Dirtman]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.

the substance is bulk mielies

Mielies is maize, commonly referred to as corn. Bulk density will depend on the type (sweet, flint, etc.) and state of the maize (with the husk, on the cob, kibbled, etc.) and moisture content.

http://www.powderandbulk.com/resources/bulk_density/material_bulk_density_chart_c.htm has various density ranges but a better source, if you're in the USA, would be a USDA agricultural extension agent in your area.

[Unregistered]

I need to convert one tonne of woodchip into cubic meters. Can anyone please help?

[JohnS]

I need to convert one tonne of woodchip into cubic meters. Can anyone please help?

It will vary with wood species, moisture, and the chipping apparatus. However, a materials sheet I use gives 360 kg/m³ dry and 540 kg/m³ wet as typical values.

Using the dry figure, a metric ton would be 2.8 m³

[Unregistered]

Can you please tell me the conversion of:
1 cubic metre of general waste to tonne?
1 cubic metre of plastic waste to tonne?
1 cubic metre of aluminium to tonne?
1 cubic metre of paper and cardboard to tonne?

Thank you.

[Unregistered]

i want to know that how many ton contain in a one cubic meter

[JohnS]

i want to know that how many ton contain in a one cubic meter

Depends on what it is a cubic meter of (you need the density of the substance):
Lead: Several (metric) tons
Steel: 7.9 t
Water: 1.00 t
Air: about 0.001 t

[Unregistered]

Hi,
pls,can anybody give me conversion factor for crush granite (19mm aggregate) from cubic meter to tonne

[Unregistered]

[QUOTE=sapnasidharth;63831]

It will be very dependent on what is in the rubble. If it is mostly broken concrete, stone, brick, try 1.6 t/m³

If there is much wooden construction material. it will be lighter. If there is much steel (beams, rebar, etc) it will be heavier.

Hi,if the substance is crush granite stone(19mm aggregate),what is conversion factor from cubic meter to tonne

[Unregistered]

It will depend on the type and size of rocks, but 1500 - 1800 kg/m³ is a reasonable range covering many types.

Hi,suppose the rock is a crush granite of 19mm aggregate chips. what is the conversion factor from cubic meter to tonne?

[JohnS]

Hi,suppose the rock is a crush granite of 19mm aggregate chips. what is the conversion factor from cubic meter to tonne?

about 1660 kg/m³ or 1.66 t/m³

[pampapathireddy]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

[Unregistered]

what is the value of cubic metre to tons?
or how many cubic metre in 1 ton?

[Unregistered]

or how many cubic meters of sand is in 1 tonne

farm yard manure : please provide me the coversion of 1 mt to cub. mtre

[JohnS]

farm yard manure : please provide me the coversion of 1 mt to cub. mtre

You need to know the density, and I don't know where to look for it.

Based on "experience", I would say that "as delivered" the density is pretty close to the density of water -- some floats, some sinks. The density of water is 1 kg/L or 1 t/m³.

It contains a lot of water, and well-dried manure is appreciably lighter, maybe half the density or even less. However, now I am really guessing.

If you can find a good density figure, just divde mass by it to get volume. In the metric system, density measured in units of g/cm³, kg/L, and t/m³ will be numerically equal. If you find density in Imperial units, you'll have to convert.

[Prasan]

Hi
I need to build a road in the Bangladesh delta to withstand a load bearing capacity of 12metric tonnes per square metre.

could you please advise on ideal soil compaction ratios ? CBR values ?
thanx

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?[/QUOTE]

[Unregistered]

how much are 7000 Tonnes in m³? please help

[JohnS]

how much are 7000 Tonnes in m³? please help

You need to tell us 7000 t of what, as the answer will depend on the density, which will depend on the material. The answer for feathers vs lead would be VASTLY different.

Process:
1) Identify the material
2) Look up or measure the density
3) Divide mass by density to get volume
4) If the units don't match, you will need to do some conversion.

[Unregistered]

how many tonnes is 1m3 of red sandstone?

Thanks in advance

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

i need to convert 1tonne of wet sharp river sand to 1 cubic meter. can anyone help

[Unregistered]

Supposed that the market price of the teak is 800 000 Kyats /ton and price of the Iron wood is 12 000 Kyats/Cubic feet. For the following wood you are given $ 900 ($1 = 1050 Myanmar Kyats). Find the remaining balance in Myanmar Kyats.
a) Teak 2” x 4” x 15’ = 15 Pcs
b) Iron Wood 2” x 4” x 10’ = 16 Pcs
c) Iron Wood 3” x 1” x 15’ = 30 Pcs
d) Teak 4” x 4” x 10’ = 6 Pcs
e) Iron Wood 2” x 1” x 18’ = 20 Pcs
f) Teak 6” x 1” x 18’ = 16 Pcs

Please help me
and I wanna know the conversion between Tons and Ft3

[sarvesh]

see i need to convert some amount of LNG having density of 464 kg/m^3 from either cubic meter per hour to tons per hour.

please help

[JohnS]

see i need to convert some amount of LNG having density of 464 kg/m^3 from either cubic meter per hour to tons per hour.

please help

Assuming you are using metric tons (tonne), 464 kg/m³ is 0.464 t/m³

[sarvesh]

i need to convert some amount given in ton/hr of LNG to m^3/hr of LNG..
for LNG having density .464 kg/l
if you wont mind can you please provide me with conversion factor for same?

thanking you for your efforts..

[JohnS]

i need to convert some amount given in ton/hr of LNG to m^3/hr of LNG..
for LNG having density .464 kg/l
if you wont mind can you please provide me with conversion factor for same?

thanking you for your efforts..

0.464 kg/L = 0.464 t/m³. Just divide tons/hour by density to get cubic meters per hour.

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.

1 tons=$1680
1 cubicmetres =?
or
1ton=?cubic metres

[Unregistered]

I need to convert cubic meter of Silica sand to ton. Density of Silica sand is 1,220 kg/cu.m.

[JohnS]

I need to convert cubic meter of Silica sand to ton. Density of Silica sand is 1,220 kg/cu.m.

If you measure in cubic meters, I assume you weigh in metric tons (1000 kg), so it is 1.22 t/m³.

There are also long tons short tons, shipping tons, etc, so if you are talking some other type of ton, please define it.

[Unregistered]

Im looking to covert 510,000 m3 of wood with 50% moisture content to tons metric?

Can anyone help?

[Dirtman]

Im looking to covert 510,000 m3 of wood with 50% moisture content to tons metric?

Can anyone help?

You need to know the density or specific gravity, which among other factors, is dependent on the wood species.

See: http://www.fpl.fs.fed.us/research/centers/woodanatomy/ and look at the wood properties techsheets.

[Unregistered]

I would like to know 1 tonne of soil = ? cubic metre

[JohnS]

I would like to know 1 tonne of soil = ? cubic metre

Dry, good quality topsoil (lots of organic content) around 0.8 m³

As it gets to be mostly clay, sand, or gravel and/or wet, 0.5 m³, maybe even a little less.

[Unregistered]

I want to know does 1m3 of sand = 1 ton?

[Unregistered]

I want to convert one cubic meter of soil in to 1 ton of soil. Please guide me how to convert

[Mrs X]

I want to know does 1m3 of sand = 1 ton?

No. Probably a fair bit more, depending on what sort of sand, and how wet it is.

If you need 1m³, get them to supply that much, it will probably be closer to 1.5 - 2 tons, (maybe more) if you have to pay by the ton.

[Unregistered]

Could someone please help me to convert 1 cu mt of Crusher Dust to tonnes??

[Unregistered]

could someone please help me convert 90cu mts of 'crusher dust' to tons

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

sand 1.45 ton = 1 m3

[Unregistered]

The closest thing I could find was concrete gravel, it has a density of 2.4 tonne/cubic meter.

cubic meter * 2.4 = tonne
tonne / 2.4 = cubic meter

15 cubic meter * 2.4 tonne/cubic meter = 36 tonne

how many tons = 1 meter
or how many meters = 1 ton

[JohnS]

how many tons = 1 meter
or how many meters = 1 ton

A length (or area) has no volume unless the other dimensions are stated, so zero tonnes will suffice.

[Unregistered]

1 ton of gravel = what in qubic metres

1 ton rock to cubic metre

[Unregistered]

[I am looking for the conversion of 1 cubic of clay to tonne

[Unregistered]

what is the conversion formul of kgs wood into cubic metres

[JohnS]

what is the conversion formul of kgs wood into cubic metres

Density (divide by it). Different woods have different densities; there is quite a variation (around 7:1) between bamboo and lignum vitae.

There is also an issue of intrinsic density (just the wood) or bulk density including the air spaces for stack logs.

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.

Hi There!

I need to convert 36,658 Metric Tons (MT) of Natural Gas to 1000's of Cubic Metres.

Please help me.

Thank you kindly,
Chandra


My e-mail address is: [link removed]

[JohnS]

Hi There!

I need to convert 36,658 Metric Tons (MT) of Natural Gas to 1000's of Cubic Metres.

Please help me.

Thank you kindly,
Chandra


My e-mail address is: [link removed]

The volume of a gas is not defined unless temperature and pressure are specified. We can use ideal gas law at "normal" conditions, 101.325 kPa, 0 °C to make an estimate or use density at those conditions.

Natural gas is mostly methane, but most of the normal impurities are heavier, so average molecular weight is >16 g/mol. MW = 18 g/mol is pretty typical and yields a density at "normal" conditions of 0.8 kg/m³ ( metric tons per cubic dekameter, t/dam³)

36,658 t/(0.8 t/dam³) = about 45800 dam³.
This will vary inversely with average molecular weight. Obviously, it will also vary at different temperatures and pressures.

[Mackson]

I wish someone help me convert 1cu.m of 4000PSI cured(21 days) concrete to it's atual weight in tons to calculate the load. The concrete in consideration is non-reinforced. Any help would be greatly appreciated.

[JohnS]

I wish someone help me convert 1cu.m of 4000PSI cured(21 days) concrete to it's atual weight in tons to calculate the load. The concrete in consideration is non-reinforced. Any help would be greatly appreciated.

Around 2.4 t. The density can vary a little according to composition.

[Unregistered]

Thank you to all who've contributed to this resource.
It's really helpful! I needed to convert Type 1 material.

[Unregistered]

how many cubic metre in 1 ton?

[Unregistered]

or how many cubic meters of sand is in 1 tonne

I need to convert six (6) metric tons of fresh water to cubic meters, can anybody help me

[JohnS]

I need to convert six (6) metric tons of fresh water to cubic meters, can anybody help me

The density varies slightly with temperature. If the water is cool or room temperature about 6 m³, increasing to about 6.3 m³ just below boiling, 100 °C.

[Unregistered]

i have to convert 1cubic metre of crabondioxide in to tonnes

[Unregistered]

I need slugs converted to bushells. but i dont know what sort of slug.

[Unregistered]

Hi,

Which value should I use for SCREENED SAND? If i wanted to convert 60m3 of screened sand to tonne..??

Should I use the value for Dry sand (which is 1.60 tonne/m3)...??

Thank you so much for your response!

[Dirtman]

Hi,

Which value should I use for SCREENED SAND? If i wanted to convert 60m3 of screened sand to tonne..??

Should I use the value for Dry sand (which is 1.60 tonne/m3)...??

Thank you so much for your response!

What are you trying to do? Having a little more information would be helpful.

The generic answer: It depends on the base material and moisture content.

For freshly processed, loose sand in a stockpile, it will be wet, so approximately 1.85 t/m3. If it's been in a stockpile for a week or so, it will still be damp and will weigh in the neighborhood of 1.7 t/m3.

Water is heavy.

[Unregistered]

I need to convert cubic metres to tonnes and I can't find that conversion anywhere. Can anyone help? My assignment is to find out how many tonnes of waste will be that I have found in metric cube. A truck holds 16 metric cubes and can take 200 metric cubes of bin bags, how many tonnes are there all together

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

convert 1 ton of fire wood in to meter cube

[Unregistered]

what is the value of cubic metre to tons?
or how many cubic metre in 1 ton?
or how many tons in 1 cubic metre?

can you answer it now please!!!!

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

In Crushed stone I usually multiply by .9 meaning that on a 6 cubic meter container, I get 5.4 tons.

[JohnS]

In Crushed stone I usually multiply by .9 meaning that on a 6 cubic meter container, I get 5.4 tons.

That would only work for a VERY light stone (pumice?). Crushed limestone is around 1.5-1.6 t/m³

[Unregistered]

1 ton of gravel = what in qubic metres

what is 1 tone of gravel in qubic metres

[JohnS]

what is 1 tone of gravel in qubic metres

The density of gravel can vary with stone type and range of stone sizes, but is usually around 1.5 - 1.6 t/m³, so 1 t is around 0.65 m³.

[Unregistered]

what is the formula thing for natural gas per cubic metre? homework is due tomorrow :/

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.

For water is the equivalence 1 cubic meter= one metric ton?

[Unregistered]

what is the value of cubic metre to tons?
or how many cubic metre in 1 ton?
or how many tons in 1 cubic metre?

how many cubic metre in 1 ton?
and how many cubic ft in 1 ton?

[Unregistered]

i need to covert cubic metres to tons

[JohnS]

i need to covert cubic metres to tons

Multiply by the density. That genereally requires either:
*Measuring the density of a sample
*Identifying the substance and looking up density in a reference book.

Equal volumes of feathers and lead have (very) different weights because they have different densities.

[akshay]

1 Ton = ? Cubic meter of crusher material

[Unregistered]

how much in cubic metre of 1tonne I-beam?

[Unregistered]

What is the conversion of 2.08m3 of limestone to ton weight please?

[Dirtman]

What is the conversion of 2.08m3 of limestone to ton weight please?

In what state?

Your asking for an accuracy that is impossible to ascertain (in any state) without testing a specific sample. Densities of solid limestone vary from 2350 kg/m3 to 2850 kg/m3, so (in short tons): from 2 tons/yd3 to 2.4 tons/yd3.

[Liz]

I need to know what the conversion is of loose maize from cubes to tons - just the normal maize?

[JohnS]

I need to know what the conversion is of loose maize from cubes to tons - just the normal maize?

The standard for commercial bushels in the US for shelled corn is 56 lb/bu. Grain actually varies, that is for a specified grain quality and moisture content; adjustments for those factors are made in commercial contracts. The standard weight varies for other grains (wheat is 60 lb).

That may be converted as

56 lb/bu x 1 bu/0.035 239 073 m³ x 0.453 592 37 kg/lb = 721 kg/m³ (0.721 t/m³)

The two conversions can be combined. For any standard bushel weight, multiply by 12.87186 for bulk density in kilograms per cubic meter. (Round sensibly, as the bushel weight won't be that precise)

[Unregistered]

or how many cubic meters of sand is in 1 tonne

5mts of grit sand convert to tonnes

[Unregistered]

i need to convert 1 cubic metre of blockstone (Sandstone Gred B of 80-120kg) to metric tonne? what is the density appropriate to be used considering the factors of void if the material is to be used to constructed a loose bund?

[Unregistered]

what is the value of cubic metre to tons?
or how many cubic metre in 1 ton?
or how many tons in 1 cubic metre?

may offeciti

[Unregistered]

how much cubic metre is 22tonnes

[Gary C]

how much cubic metre is 22tonnes

It depends on the density of the substance (Kg/m^3). Without knowing the substance (and its associated density) your question can not be answered.

[Unregistered]

refer reinforced concrete designer's handbook.all question answered in this book.

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

Please convert 10000 tons to cubic metre

[Unregistered]

It depends on the density of the substance (Kg/m^3). Without knowing the substance (and its associated density) your question can not be answered.

Please convert 10000 tons of sharp river sand to cubic metre

[Unregistered]

It just so happens that gram/cubic centimeter is the same as tonne/cubic meter.

So something with a density of 0.74 gram/cubic centimeter you would:

tonne / 0.74 = cubic meters
cubic meters * 0.74 = tonnes

So Nice Explanation ya

[ameet]

1 cubic meter of sand & gravel equals how many tons?

[Unregistered]

conversion of LPG from 90.34 cubic meter to kilograms.

[Unregistered]

What is the density of sand and stone dust.

[balu]

i want to know the density of cotton hull, DORB, RICE POLISH. KINDLY HELP ME IN GETTING THE VALUES

[Unregistered]

how can you compute for the volume capacity of a concrete bucket (cone type) in ton?

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

35 cubic meters of cracker dust to tonnes

[cognitor]

I need to convert 25 cubic meters of stone (density of 19mm) to tonnes. Can anybody help?
I would need similar calcs - can someone inlcude the formula please?

[JohnS]

I need to convert 25 cubic meters of stone (density of 19mm) to tonnes. Can anybody help?
I would need similar calcs - can someone inlcude the formula please?

It will depend on the type of stone and the range of particle sizes, but 1.5 - 1.6 t/m³ is a good estimate for many crushed stones.

[Unregistered]

Hi My question is.....What is the formula you take to convert tons to cubic meter??? Example: If I bring a load of wood.........on my scale ticket I will have the gross ton weight, tare weight and the net ton weight. How do I convert it to cubic meters???

Please help me!!

[JohnS]

Hi My question is.....What is the formula you take to convert tons to cubic meter??? Example: If I bring a load of wood.........on my scale ticket I will have the gross ton weight, tare weight and the net ton weight. How do I convert it to cubic meters???

Please help me!!

Every substance has a unique density. If you have equal weights of lead and feathers, the feathers pile is MUCH bigger. For some things, you can look up the density in a reference book. For some things like a stack of wood, you can only make a rough estimate as it depends on the type of wood (bamboo vs lignum vitae) and how it is cut and stacked.

Volume and weight are two entirely different properties of a material. There is no general conversion, you have to know the density of the specific substance. If you have density in tonnes per cubic meter, divide weight in tonnes by density to get volume in cubic meters.

[Unregistered]

could you tell me:
1m3 (in ground, compacted) = ?m3 (when dug out of ground) = ? tonnes

based on relatively dry clay

[Unregistered]

depends on condition of clay


Clay, dry excavated 1089 kg/m3
Clay, wet excavated 1826 kg/m3
Clay, compacted 1746

[Unregistered]

[QUOTE=Unregistered;3755]what is the value of cubic metre to tons?
or how many cubic metre in 1 ton?
or QUOTE]

[Rishi]

1 tonne asphalt is equivalent to 2.4 cu m.

[JohnS]

1 tonne asphalt is equivalent to 2.4 cu m.

You have this reversed. 1 m³ is about 2.4 t

[Unregistered]

I need to convert metric tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

Plz send me right ans. about 1 metric tons equal to how many Cubic meters. plz send fast reply

[Mrs X]

Plz send me right ans. about 1 metric tons equal to how many Cubic meters. plz send fast reply

What material?

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

[Unregistered]

converting weight(tons) to cubic meter requires the specific gravity of the materials in relation to water. Different materials have different specific gravity. EXAMPLE: 1 cubic meter of water equals 1 ton of water. 1 cubic meter of oil equals 0.65 ton of oil. 1 cubic of concrete equal 2.34tons of concrete. therefore: Specific gravity of oil is 0.65 times to water, S.G. of concrete is 2.34times of water.

[social]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

19 cubic meters to tons

240 litres to tones

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.

1 Ton of Metal is how many CUM

1 Ton of Sand is how many CUM

[JohnS]

1 Ton of Metal is how many CUM

1 Ton of Sand is how many CUM

What kind of metal? For equal volumes, aluminum is much lighter than steel, lead much heavier. Steel is about 7.85 t/m³

Dry, loose sand is about 1.4 t/m³

[mureed786@gmail.com]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

20mm Road Crush (Des2 Class20)
20mm Surfacing Crush (Des4 Class20)
40mm Road Crush (Des2 Class40)
80mm Road Crush (Des6 Class80)
Screened Sand
Class 1M Rip-Rap(5"x2")

[JohnS]

20mm Road Crush (Des2 Class20)
20mm Surfacing Crush (Des4 Class20)
40mm Road Crush (Des2 Class40)
80mm Road Crush (Des6 Class80)
Screened Sand
Class 1M Rip-Rap(5"x2")

It depends on the type of rock crushed, and the uniformity of size more than size. For limestone or similar rock about 1.5 - 1.6 t/m³ for any of them, provided sizes are relatively uniform.

If it includes that size down to stone dust, somewhat heavier, as the dust fits in the voids.

The sand will be about 1.4 - 1.5 t/m³. Not sure about the riprap.

[Unregistered]

Roughly how many cubic meters of clean fill dirt from a pool dig in a tonne?
If someone could answer asap as I need to work out how much it is going to cost to get rid of...

[JohnS]

Roughly how many cubic meters of clean fill dirt from a pool dig in a tonne?
If someone could answer asap as I need to work out how much it is going to cost to get rid of...

It will depend on two things:
*Ratio of clay, sand, gravel (heavy) vs top soil with organic conent (light)
*Moisture content.

Once dug up, it will lossen and occupy more volume, but based on the hole dimensions around 2 t/m³ wet as dug, maybe 1.6 t/m³ if it dries well before it is picked up.

[Unregistered]

how many tons in 1 cubic metre?[/QUOTE]

[Unregistered]

62540 ton agreegate how much cubic meter

[Unregistered]

1 tone aggregate how many meter cub

[Unregistered]

how many tons in 1 cubic metre?[/QUOTE]

how many tons in 1 cubic metre?

[NOMI]

i need to convert tons to cubic metres and i can't find that conversion anywhere. Can anyone help?

20tons=-----how many cubic meters

[JohnS]

20tons=-----how many cubic meters

It depends on the density of the substance. Lead and feathers give different answers.

[lntkeshav@gmial.com]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

I need to convert tons to cubic meters .The substance is "sand"

[JohnS]

I need to convert tons to cubic meters .The substance is "sand"

Dry sand, 1.4 t/m³, damp, 1.68 t/m³, wet 1.84 t/m³
Divide by whichever number applies to get cubic meters.

[Unregistered]

i need to convert tons into m3

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.

how many cubic meter is 1 ton 10 mm aggrgate. Please send me your answer... Thanks

[VinothVanathi]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help? Please immediately

[Unregistered]

it depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance i may be able to look up the data.

the substance is iron ore

[Unregistered]

I need to convert the following from metric tonnes to cubic metre's, could you help please?
Single size crushed concrete
Crushed Asphalt
Type 1
Limestone Sand
Red Shale

Thanks

[JohnS]

I need to convert the following from metric tonnes to cubic metre's, could you help please?
Single size crushed concrete
Crushed Asphalt
Type 1
Limestone Sand
Red Shale

Thanks

They are probably all about 1.4 - 1.6 t/m³, but for higher accuracy, you need a more detailed "materials" sheet than I have, since nothing exact matches those descriptions.

[william@envitech.ae]

1 ton of gravel = what in qubic metres

convert 1 ton of dry crushed mountain gravel to cubic meter, give the dry weight of gravel per cubic meter

[JohnS]

convert 1 ton of dry crushed mountain gravel to cubic meter, give the dry weight of gravel per cubic meter

Around 1.5 t/m³. It may be slightly higher, 1.6 t/m³ if there is a wide range of piece sizes (small pieces can fit in the space between bigger pieces). It can also vary somewhat depending on the type of rock that is crushed.

[Unregistered]

i need to convert tons to cubic metres and i can't find that conversion anywhere. Can anyone help?

1 cubic meter = how much content of gas

[Unregistered]

we looking at volume of sand been pumped and conveyed with a 20 tonne bucket

[Unregistered]

1m3 = 1e3m3 of gas or 1000m3 of gas (if yoru talking natural gas that's the general thing used in petroleum industry)

[Unregistered]

i need to convert tons to cubic metres and i can't find that conversion anywhere. Can anyone help?

convert ton to cubic meter

[JohnS]

convert ton to cubic meter

Read post #2. Divide by density. In general, density depends on the material ( and temperature, pressure, etc). If you don't identify the material, there is no way to convert.

[edward]

1 ton of gravel = what in qubic metres

i want to know 1 ton of gravel=what in qubic metres?

[JohnS]

i want to know 1 ton of gravel=what in qubic metres?

One metric ton is about 0.67 m³

[Unregistered]

I want to convert 1 tone to cubic metres

[JohnS]

I want to convert 1 tone to cubic metres

Divide by density

[Unregistered]

I need to convert 70 cubic metres of dirt & need to covert it to tons to cubic metres and I can't find that conversion anywhere. Can anyone help?[/QUOTE]

[JohnS]

I need to convert 70 cubic metres of dirt & need to covert it to tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

There is no fixed conversion and "dirt" covers a wide range of material with different densities. Topsoil (due to organic content is lighter than fill, and dry dirt is lighter than damp or wet. Figures may range from 1.25 t/m³ (dry topsoil)to 1.8 t/m³ or more (damp fill).

If you need any precision, weigh a sample of of known volume, otherwise guess around 1.5 t/m³, the center of the range. Note that considerable variation is possible.

[Unregistered]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

Can you please advise how many tons of rubble is in 1 cubic metre please. Ie would like to find out how many tons in 1 cubic metre. Thanks

[Unregistered]

[QUOTE=Unregistered;708]

I need to convert 1 tons of crush sand to cubic metres and I can't find that conversion anywhere. please help in this at the earliest. Can anyone help at the earliest.can you please advise at the earliest.

[JohnS]

[QUOTE=Unregistered;708]

I need to convert 1 tons of crush sand to cubic metres and I can't find that conversion anywhere. please help in this at the earliest. Can anyone help at the earliest.can you please advise at the earliest.

Dry sand around 1.4-1.45 t/m³, so you have around 0.7 m³.

[Unregistered]

i want convert 1200 metric tonne heavy fuel oil density 0.92 to cubic metres

[JohnS]

i want convert 1200 metric tonne heavy fuel oil density 0.92 to cubic metres

Density in 0.92 t/m³ so
1200 t x 1 m³/0.92 t = 1304 m³

[Unregistered]

1 ton of gravel = what in qubic metres.

[Unregistered]

It depends on the substance. Every substance will have a different weight to volume conversion factor.

If you post the substance I may be able to look up the data.

10,000 cubic meters = how much tons

[Unregistered]

convert 20 tonnes to cubic metre

[JohnS]

convert 20 tonnes to cubic metre

Depends on the material. Feathers and lead give different answers.

[Unregistered]

what is the value of cubic metre to tons?
or how many cubic metre in 1 ton?
or how many tons in 1 cubic metre?

Kindly get how many cubic metre in 1 ton? & how many tons in 1 cubic metre?
for sand.10mm aggregate,20mm aggregate.

Thanks
Sankar

[JohnS]

Kindly get how many cubic metre in 1 ton? & how many tons in 1 cubic metre?
for sand.10mm aggregate,20mm aggregate.

Thanks
Sankar

Sand ~ 1.4 t/m³, aggregate ~ 1.5-1.6 t/m³ assuming the material is dry.
If the aggregate is mixed sizes, including fines, it will fill voids and be a little heavier

[pnugraha52@yahoo.com]

I need to convert tons to cubic metres and I can't find that conversion anywhere. Can anyone help?

1 ton =......cubic metre